CentroPlus / CentroPlus-B (25/35/49 kW)

The steel hot water boilers CentroPlus and CentroPlus-B (nominal heat output of 25 and 35 kW) have two separate combustion chambers inside the boiler water. The left combustion chamber is used for solid or liquid fuel firing, the right combustion chamber is used for pellet or liquid fuel firing. The possibility of a combination of solid fuel firing and automatic start-up of the oil and pellet burner at a time when the solid firing does not meet the need any more, make this boiler particularly interesting.

The specific quality of CentroPlus-B boilers is a built-in stainless steel hot water heater situated inside the boiler’s water which makes it very interesting because it provides continuous heating of hot water in the boiler without additional investment. A successful combination of modern technologies and high-quality construction materials as well as proven technical solutions make these boilers safe, reliable and easy to assemble. They are made in accordance with the European standard EN 304 and EN 303-5.

PRODUCT CHARACTERISTICS

  • TWO COMBUSTION CHAMBERS

    Two combustion chambers in the common boiler water.

  • VARIOUS ENERGIES USED

    Designed for solid fuels, solid and liquid fuels.

  • BOILER

    Built in stainless steel hot water boiler flooded in boiler water.

  • INSTALLATION

    Separate body of the boiler, separate heat-insulating panel and a separate oil or pellet-set  makes system easy to install.

  • Hot water boiler CentroPlus is intended for central heating and designed for solid fuel, solid and liquid fuel firing, solid fuel and pellet firing and liquid fuel and pellet firing with the rated output of 25, 35 and 49 kW.
  • Ability to interchange the uses of combustion chambers.
  • Only one flue exhaust connection.
  • Ability to connect thermal safety unit into prepared openings.
  • The body of the boiler is delivered separately from the casing with thermal insulation, and the oil burner and pellet set. This enables uncomplicated transport and reduces the risk of damage to a minimum.

  • Delivery content:– the boiler body with boiler door is delivered on a wooden pallet (with lid of the left firebox door, lid of the right firebox register, ash trays, left and right firebox grates and turbulators);
    – in board box with boiler casing, thermal insulation, thermometer, draught controller (such as CALEFFI 529 500 or ESBE C 20/25), back ash box, cleaning accessories (accessories holder, brush, scraper and poker), protective box for extension for pellet burner and set of screws and snappers.
  • The CentroPlus-B boiler has a built-in stainless steel water heater, which does not require a separate circulation pump. This would be necessary if the water heater were separated from the boiler.
  • The CentroPlus-B boiler has a built-in stainless steel water heater, which does not require a separate circulation pump. This would be necessary if the water heater were separated from the boiler.
  • The boiler is tested and certified to the European standard EN 303-5 and EN 304 and manufactured in accordance with ISO 9001 and ISO 14001 standard.

BASIC DIMENSIONS:

DELIVERY AND OBLIGATORY ADDITIONAL EQUIPMENT:

SOLID FUEL / OIL COMBUSTION CHAMBER:

  • A carefully sized combustion chamber with triple pass flue gas flow assures boiler operation at high efficiency. This makes the boiler very economical to use.
  • The large door and combustion chamber enable firing with big pieces of wood, as well as easy cleaning and maintenance.

OIL / PELLET COMBUSTION CHAMBER:

  • A carefully sized combustion chamber with triple pass flue gas flow and turbulators for better heat exchange assure boiler operation at high efficiency. This makes the boilers very economical to use.
  • The large water capacity inside the boiler reduces the number of firings, prolongs its life and saves energy.
  • The boiler door is ready prepared for connection of the pellet/oil burner.

TECHNICAL INSTRUCTIONS / BROCHURES:

Centrometal d.o.o. shall not be responsible for possible incorrect data caused by error made in transcription and all figures and diagrams are for explanatory purposes only and relevant adjustment have to be made at the spot. In any case, it reserves the right to modify its products as deemed to be required and useful without any prior notification.