Oil/Gas boilers

EKO-CUP M3 steel hot water boilers (heat outputs 18- 80 kW) and EKO-CUP M3 Bg (heat outputs 25-80 kW) are of modern design and are notable for their high efficiency level resulting from continual development of design features, the application of modern technologies and the use of high quality materials. These factors also make these  [ » ]

EKO-CUP S3 steel hot water boilers (heat output range 125 – 600 kW) are engineered to meet heating requirements in the middle to large premises, as well as to be the heat source for manufacturing and processing. The boiler can be configured as a stand alone unit or as a series of modular units. This  [ » ]

EKO-CUP V3 steel hot water boilers (heat output range 0,8-1,5 MW) and EKO-CUP SV3 (heat output range 1,5-2,5MW) are engineered to meet heating requirements in middle sized or large premises, or to provide the heat source for manufacturing or processing. This boiler can be installed as a separate unit or as part of a modular  [ » ]

The steel hot water boilers CentroPlus and CentroPlus-B (nominal heat output of 25 and 35 kW) have two separate combustion chambers inside the boiler water. The left combustion chamber is used for solid or liquid fuel firing, the right combustion chamber is used for pellet or liquid fuel firing. The possibility of a combination of  [ » ]

CentroPlus and CentroPlus-B solid fuel and wood pellet fired boilers: The steel hot water boiler CentroPlus and CentroPlus-B can be fired with wood pellets and with solid fuel. For wood pellet firing the Cm Pelet-set for CentroPlus must be added(volume of the pellet tank 0,37 m3 or 0,8 m3). In addition to wood pellet only and  [ » ]