EKO-CK P
EKO-CK P with a nominal heat output of 14 to 110 kW are designed for solid fuel, pellets and oil. They are intended for heating from the smallest to large facilities either as a primary heat source or, which is increasingly the case today, as an alternative source. They are recognizable by the successful combination of modern technologies and quality building materials with ease of installation and use.
A series of proven technical solutions makes these boilers safe and reliable in operation. The possibility of simple installation of equipment for pellets or oil is a special value of these boilers. Made in accordance with the European standard EN 303-5.
-
ADAPTABLE
Intended for burning with several types of fuel (solid, pellets, liquid). -
ECONOMICAL
The three-pass flue gas routing ensures a high degree of boiler efficiency. -
BOILER PUMP THERMOSTAT
The boilers are factory-equipped with a thermostat that controls the operation of the boiler pump. -
INSTALLATION
The boiler body is supplied separately, as is the casing with thermal insulation, which allows for easy transport and installation.
Product characteristics
- Hot water boiler for central heating designed for firing with multiple types of fuel (solid, pellets, liquid), with a nominal heat output of 14 to 110 kW.
- An appropriately sized firebox and three-pass flue gas routing ensure a high degree of boiler utilization, making it “economical”.
- The boiler firebox is made of high-quality 5 mm boiler sheet metal.
- The large doors and the boiler firebox enable firing with large solid fuels and easy cleaning and maintenance. Easy change of opening direction of the upper and lower doors.
- Possibility of installing thermal protection on factory-prepared openings.
- The boilers are factory-equipped with a thermostat that controls the pump operation.
- The boiler body is delivered separately, as well as a separate casing with thermal insulation, which allows for easy transport and installation and reduces the risk of damage.
- The basic delivery of the boiler includes a boiler water temperature indicator, cleaning accessories and an ashtray.
- In the case of oil firing, an oil burner installation kit and turbulators are required (the number depends on the boiler power).
- In the case of wood pellets firing, the Cm Pellet-set includes a pellet burner installation kit on the lower boiler door, turbulators, pellet burner, pellet tank, pellet conveyor and boiler control.
- When firing with oil or pellets, turbulators must be installed in the boiler (delivered from the factory with the Cm Pellet-set, ordered separately for oil firing).
- The basic boiler burner control (oil) is additionally supplied and is installed in a factory-prepared location on the upper boiler casing cover.
- The boiler is tested and certified according to the European standards EN 303-5 and EN 304 and manufactured in accordance with the ISO 9001 and ISO 14001 standards
EKO-CK P
Delivery and additional equipment
- boiler body with boiler door.
- 1 cardboard box containing external casing with thermal insulation, cleaning accessories (rake, brush, rake and accessory holder), set (sheet metal screw, dowels, screws, plug).
Additional equipment for burning solid fuel:
• air regulator (such as CALEFFI 529 500, ESBE C20/25...)
• equipment from scheme 1 or 2 if the boiler is connected to a closed heating system (see technical instructions)
• equipment from scheme 3 if the boiler is connected to an open heating system (see technical instructions)
Additional equipment for burning wood pellets:
- For boilers: EKO-CK P 20, EKO-CK P 25
• pellet burner and digital boiler controller CPREG-Touch
• pellet tank CPSP
• pellet transporter CPPT
• pellet burner installation set
- For boilers: EKO-CK P 30, EKO-CK P 35
• pellet burner and digital boiler controller CPREG-Touch
• pellet tank CPSP
• pellet transporter CPPT
• pellet burner installation set
- For boilers: EKO-CK P 40, EKO-CK P 50
• pellet burner and digital boiler controller CPREG-Touch
• pellet tank CPSP
• pellet transporter CPPT-50
• pellet burner installation set
Additional equipment for burning oil:
• boiler controller EKO-CK/CKB for oil
• oil burner with associated equipment
• steel turbulators
• oil burner installation set