WW

💧 Available volumes

WW enamelled hot water boilers, with capacities from 1.500 to 2.000 litres, are manufactured using the latest robotic welding technology, using high-quality materials that ensure long-lasting operation and high efficiency.
They are intended for heating and accumulating domestic hot water via connection to a heat source within a heating system or technological process. Thanks to optimised heat transfer and minimal heat losses, they are ideal for use in households, boiler rooms and solar systems.
For optimal operation, proper installation and regular maintenance according to technical instructions are recommended.

🛒 Where to buy? 🛠️ Authorized service
WW
  • APPLICATION

    APPLICATION

    Suitable for households, boiler rooms and solar systems thanks to flexible connection options.
  • ENAMELLED

    ENAMELLED

    According to DIN 4753.
  • EFFICIENCY

    EFFICIENCY

    By using modern technologies and proven technical solutions, a high heat transfer coefficient and negligible losses to the environment are enabled.
  • DURABILITY

    DURABILITY

    Robotic welding and quality materials ensure a long service life with minimal maintenance.

Product characteristics

  • WW hot water boilers with volumes of 1.500 and 2.000 liters are intended for heating and accumulating domestic hot water by connecting it to a boiler circuit or to another heat source within a technological process.
  • They are suitable for installation in solar systems, as additional accumulation with BE solar boilers.
  • Enameled water heaters are made of high-quality stainless steel, which guarantees high hygienic conditions.
  • Due to the rapid heating with a large heating surface of the tube exchanger, they provide the comfort of large quantities of hot water.

Technical instructions

Technical instructions - WW

Brochure

Brochure - WW

Delivery and installation

  • At the cold sanitary water inlet to the boiler, it is mandatory to install:
    - expansion tank for sanitary water
    - tap for draining water from the boiler (mandatory via T-piece)
    - certified safety valve with an opening pressure of 10 bar (1.0 MPa),
    - non-return valve
    - pressure reducing valve that reduces the pressure of the cold sanitary water inlet to 4 bar (0.4 MPa) (if its pressure is higher).
  • The WW hot water heater is delivered on a pallet with factory-mounted insulation and a protective magnesium anode.
  • If the entrance door to the room is smaller than the boiler, the insulation can be removed and then re-mounted in the room.