EPM

💧 Available volumes

EPM enamelled hot water solar water heaters with volumes of 300, 500, 800, 1000, 1500 and 2000 litres are intended for heating and accumulating domestic hot water using solar energy, reheating with a heat pump and alternatively reheating with an electric heater. Thanks to double exchangers, they enable the use of multiple energy sources – solar energy, heat pump, electricity, gas or biomass. 

They are made using modern robotic welding technology, using quality materials that ensure long-lasting operation and high efficiency. The water heaters are characterized by excellent thermal insulation, rational energy consumption and a design adapted to modern heating systems, which makes them a reliable and economical solution for everyday use.

🛒 Where to buy? 🛠️ Authorized service
EPM
  • APPLICATION

    APPLICATION

    Intended for preparing larger quantities of hot sanitary water with the possibility of using different energy sources.
  • ENAMELLED

    ENAMELLED

    According to DIN 4753.
  • EFFICIENCY

    EFFICIENCY

    By using modern technologies and proven technical solutions, a high heat transfer coefficient and negligible losses to the environment are enabled.
  • DURABILITY

    DURABILITY

    Robotic welding and quality materials ensure long-lasting operation with high reliability.
EPM EPM EPM

Product characteristics

  • EPM enameled hot water boilers are available in volumes of 300, 500, 800, 1000, 1500 and 2000 liters.
  • They are intended for the preparation and accumulation of hot sanitary water in households, catering and other facilities.
  • They enable the use of multiple energy sources: solar energy, heat pumps, electricity, gas and biomass.
  • They are made using modern robotic welding technology, from quality materials that ensure long-lasting operation.
  • They are characterized by excellent thermal insulation and a construction adapted to modern heating systems.
  • High efficiency and rational energy consumption enable the economical preparation of larger quantities of hot water.

Technical instructions

Technical instructions - EPM

Brochure

Brochure - EPM

Delivery and installation

  • At the cold sanitary water inlet to the boiler, it is mandatory to install:
    - expansion tank for sanitary water
    - tap for draining water from the boiler (mandatory via T-piece)
    - certified safety valve with an opening pressure of 10 bar (1.0 MPa),
    - non-return valve
    - pressure reducing valve that reduces the pressure of the cold sanitary water inlet to 4 bar (0.4 MPa) (if its pressure is higher).
  • The EPM solar water heater is delivered on a pallet with factory-installed insulation and a protective magnesium anode.
  • In the case of the EPM 800–2000 model, if the inlet door is smaller, the insulation can be removed and reinstalled later.