BE

💧 Available volumes

Hot water enamelled solar water heaters BE, with capacities from 200 to 1.000 litres, are manufactured using the latest robotic welding technology using high-quality materials, ensuring long-lasting operation, high efficiency and reliability. Thanks to the ability to use various energy sources – such as solar, electricity, gas and biomass – and optimised heat transfer and minimal heat losses, BE water heaters enable the preparation of larger quantities of hot water with rational energy consumption, which significantly reduces the cost per unit of hot water produced. Their modern design and excellent insulation make them an ideal solution for households, boiler rooms and solar systems, and for optimal operation, proper installation and regular maintenance according to the manufacturer's technical instructions are recommended.

🛒 Where to buy? 🛠️ Authorized service
BE
  • APPLICATION

    APPLICATION

    Suitable for households, boiler rooms and solar systems thanks to flexible connection options.
  • ENAMELLED

    ENAMELLED

    According to DIN 4753.
  • EFFICIENCY

    EFFICIENCY

    By using modern technologies and proven technical solutions, a high heat transfer coefficient and negligible losses to the environment are enabled.
  • DURABILITY

    DURABILITY

    Robotic welding and quality materials ensure a long service life with minimal maintenance.
BE BE BE

Product characteristics

  • BE hot water boilers with volumes of 200, 300, 400, 500, 800 and 1.000 liters are intended for heating and accumulating domestic hot water by connecting it to a boiler circuit or to another heat source within a technological process.
  • Enameled water heaters are made of high-quality stainless steel, which guarantees high hygienic conditions.
  • Due to the rapid heating with a large heating surface of the tube exchanger, they provide the comfort of large quantities of hot water.

Technical instructions

Technical instructions - BE

Brochure

Brochure - BE

Delivery and installation

  • At the cold sanitary water inlet to the boiler, it is mandatory to install:
    - expansion tank for sanitary water
    - tap for draining water from the boiler (mandatory via T-piece)
    - certified safety valve with an opening pressure of 10 bar (1.0 MPa),
    - non-return valve
    - pressure reducing valve that reduces the pressure of the cold sanitary water inlet to 4 bar (0.4 MPa) (if its pressure is higher).
  • The BW hot water heater is delivered on a pallet with factory-mounted insulation and a protective magnesium anode.
  • If the entrance door to the room is smaller than the boiler, the insulation can be removed and then re-mounted in the room (only on BE 800-1000).