EPM 2000
💧 Available volumes
EPM enamelled hot water solar water heaters with volumes of 2000 liters are intended for heating and accumulating domestic hot water using solar energy, reheating with a heat pump and alternatively reheating with an electric heater. Thanks to double exchangers, they enable the use of multiple energy sources – solar energy, heat pump, electricity, gas or biomass.
They are made using modern robotic welding technology, using quality materials that ensure long-lasting operation and high efficiency. The water heaters are characterized by excellent thermal insulation, rational energy consumption and a design adapted to modern heating systems, which makes them a reliable and economical solution for everyday use.
-
APPLICATION
Intended for preparing larger quantities of hot sanitary water with the possibility of using different energy sources. -
ENAMELLED
According to DIN 4753. -
EFFICIENCY
By using modern technologies and proven technical solutions, a high heat transfer coefficient and negligible losses to the environment are enabled. -
DURABILITY
Robotic welding and quality materials ensure long-lasting operation with high reliability.
Product characteristics
- EPM enameled hot water boilers are available in volumes of 2000 liters.
- They are intended for the preparation and accumulation of hot sanitary water in households, catering and other facilities.
- They enable the use of multiple energy sources: solar energy, heat pumps, electricity, gas and biomass.
- They are made using modern robotic welding technology, from quality materials that ensure long-lasting operation.
- They are characterized by excellent thermal insulation and a construction adapted to modern heating systems.
- High efficiency and rational energy consumption enable the economical preparation of larger quantities of hot water.
EPM
Technical instructions
Technical instructions - EPM
Brochure
Brochure - EPM
Delivery and installation
- At the cold sanitary water inlet to the boiler, it is mandatory to install:
- expansion tank for sanitary water
- tap for draining water from the boiler (mandatory via T-piece)
- certified safety valve with an opening pressure of 10 bar (1.0 MPa),
- non-return valve
- pressure reducing valve that reduces the pressure of the cold sanitary water inlet to 4 bar (0.4 MPa) (if its pressure is higher).
- The EPM solar water heater is delivered on a pallet with factory-installed insulation and a protective magnesium anode.
- In the case of the EPM 800–2000 model, if the inlet door is smaller, the insulation can be removed and reinstalled later.
