EKO-CUP S3

🔥 Available powers

Steel hot water boilers EKO-CUP S3 with a nominal heat output of 125 to 600 kW are intended for heating medium and larger buildings, and as a heat source for various technological processes. They are installed either as separate units or several of them are connected in parallel in a cascade.

They are recognizable by the successful combination of modern technologies and high-quality building materials, as well as the simplicity of installation and monitoring. The use of proven technical solutions makes these boilers safe and reliable in operation. The three-pass flue gas system is an important reason for the economy of these boilers. A wide range of automatic regulators, as additional equipment, provides the possibility of complete automation of the boiler room and central or remote monitoring.

🛒 Where to buy? 🛠️ Authorized service
EKO-CUP S3
Run 3D model
  • EFFECTIVE

    EFFECTIVE

    Built-in turbulators enable a better transfer of heat from the flue gases to the boiler water.
  • INSULATION

    INSULATION

    A special feature is the exceptional thermal insulation of the boiler.
  • CONTROLLER

    CONTROLLER

    (Mandatory accessory) – from 2020, the advanced CUPREG-Touch regulation is also available.
  • INSTALLATION

    INSTALLATION

    It is delivered in parts, which allows for easy transport and installation of the boiler.

Product characteristics

  • Hot water boiler for central heating with a three-pass flue gas system, output 125 to 600 kW.
  • It is economical and environmentally friendly, with a high degree of utilization.
  • Max. operating pressure of the boiler 3 bar (standard) or 6 bar (on request), and 90°C (standard), 100°C or 105°C (on request) max. operating temperature.
  • Built-in turbulators enable better heat transfer from flue gases to boiler water, regulation of the firebox resistance, regulation of the flue gas outlet temperature, i.e. high-quality coordination of the boiler-burner-chimney operation.
  • The high water content in the boiler reduces the number of starts and extends the life of the burner and saves energy.
  • The technical solutions used are the reason for almost negligible initial condensation.
  • All boiler connections are on the top, which allows for easy connection to the heating installation.
  • Since 2020, the boiler control is sold separately, as one of 4 models can be ordered (Basic boiler controller / 90°C, CUPREG-Touch / 90°C, CUPREG-Touch / 100°C, CUPREG-Touch / 105°C)
  • A special feature is the exceptional thermal insulation of the boiler.
  • The boiler door with a blind panel is adapted for the installation of all fan burners available on the market.
  • A separate boiler body is supplied, as well as a separate casing with thermal insulation, which allows for easy transport and installation of the boiler.

EKO-CUP S3

Technical data

Delivery, mandatory and optional equipment

  • The EKO-CUP S3 hot water boiler body is supplied with a specially packaged outer casing of the boiler made of plastic-coated sheet metal, mineral wool insulation that reduces heat loss through convection and radiation, and cleaning accessories - a cleaning brush.
  • EKO-CUP S3/V3- REG - 90 °C

or

  • Basic boiler controller CUPREG-Touch 90 °C, 100 °C or 105 °C

Internet supervision and management of the boiler (with Cm-WiFi box and CUPREG-Touch)

Web portal

Easy and fast access to the web portal – anytime, anywhere! Use your smartphone, tablet or computer to intuitively read and adjust values through a modern graphical interface.

Touch screen (with CUPREG-Touch)

  • Simple management of boiler operation.
  • Touch screen (with CUPREG-Touch)
  • Multifunctional digital regulation for precise control of the boiler
  • The 4.3" color screen enables clear and intuitive interaction
  • Direct control over the content displayed on the screen
  • Simple and efficient management of boiler operation