Steel hot water boilers EKO-PEK for solid fuel firing are engineered for heating of smaller premises and for cooking and baking. They are produced in three options and have a nominal heat output 15, 23 and 29 kW.

Additional power is produced by heating of the room through the upper plate. The boilers EKO-PEK 23 are produced with and without the circulation pump, while the boilers EKO-PEK 15 and EKO-PEK 29 are produced only without the circulation pump. There is possible to choose between boilers with right and with the left connection to the chimney. If the heating requirement corresponds to the needs, they can produce the heating energy for more than only one floor. They can be connected to open and to closed central heating systems.

Modern design and dimensions according to usual furniture standards enable the integration into the kitchen space, as well as into any other room inside the house, which has a direct connection to the chimney. Boilers are produced according to the ISO 9001/2000 norm.

Characteristics of EKO-PEK 15, EKO-PEK 23 A/B and EKO-PEK 29 boilers:

- Hot water boiler for central heating systems, cooking and baking is produced for solid fuel firing.

- Additional heating effect is produced by the upper plate which warms up the room.

- Accordingly dimensioned combustion chamber and a few flue gas passes enable a high performance temperature exchange and cooking on its upper plate, as well as baking in the oven.

- Possibility to choose summer or winter heating regime on EKO-PEK 23, and inbuilt grid on the boilers EKO-PEK 15 and EKO-PEK 29 enables cooking and backing during the whole year.

- In the wide oven use of standard dishes possible.

- Fire-proof glass and thermometer on the oven door enables controlling of food processing.

- Delivery includes heat exchanger and connection to the thermal valve which enables the installation also to the closed central heating systems.

- The big door enables firing with big peaces of solid fuel, as well as easy cleaning and maintenance.

- The circulation pump of central heating system is steered by a factory built-in thermostat.

- The flue gas exhaust tube on its upper lateral left side (left layout) or on its upper lateral right side (right layout) enables connection to the chimney.

- Basic delivery includes also the draught regulator and thermomanometer.

- Economically and ecologically acceptable.

Boiler EKO-PEK 23
Nominal heat output is 23 kW.
It can be produced in two options:
- EKO-PEK A with integrated circulation pump and filling/draining cock.
- EKO PEK B without a.m. parts, but has an integrated wood storage.

Boiler EKO-PEK 15 and EKO-PEK 29
Nominal heat output is 15 kW or 29 kW.
Without integrated circulation pump and filling/draining cock.
Position of the grid inside the combustion chamber can be changed by means of the built in mechanism.

Hot water supply demands:
In order to meet this requirement, the multiple stage boilers EKO-PEK can be connected to one of our hot water heaters. Therefore we suggest the combination with the wall hanged hot water heaters SKB Digi or LKB Digi, with standing hot water heaters TB120 - 200 l and TB 300 - 800 l or with solar hot water heaters STEB, as well as with combined hot water heaters CAS-BS, if there is a need to build in a solar heating system in the future.

Additional equipment:
Obligatory - in case the boiler is connected to the closed central heating system - thermal safety valve, safety-air vent group (2,5 bar), expansion vessel.