Steel hot water boilers EKO-CET for solid fuel firing are engineered for heating of smaller premises and for cooking. They are produced in two options, with and without the pump, of a nominal heat output 23 kW.

Additional power is produced by heating the room through the upper plate. If the heating requirement corresponds to the needs, they can produce the heating energy for more than only one floor. They can be connected to open and to closed central heating systems. Modern design and dimensions according to usual furniture standards enable the integration into the kitchen space, as well as into any other room inside the house, which has a direct connection to the chimney. Boilers are produced according to the ISO 9001/2000 norm.

Characteristics of EKO-CET boilers:

- Hot water boiler for central heating systems and cooking is produced for solid fuel firing.

- Additional heating power is produced by the upper plate which warms up the room.

- Accordingly dimensioned combustion chamber and a few flue gas passes enable a high performance temperature exchange and cooking on its upper plate.

- Possibility to choose summer and winter heating regime enables cooking during the whole year.

- Delivery includes heat exchanger and connection to the thermal safety valve which enables the installation to the closed central heating systems.

- The big door enables firing with big peaces of wood (solid fuel), as well as easy cleaning and maintenance.

- Economically and ecologically acceptable.

- Basic delivery includes also the draught regulator and thermomanometer.

- The circulation pump of central heating system is steered by a built-in thermostat.

- Nominal heat output (water) is 23kW.

 - Connection to the chimney on its back side and right lateral side- right layout; from the left back side and from lateral left side- left layout.

- Flue gas exhaust connections have a diameter of 130 mm.

Produced in two options:

- EKO-CET 23 A with integrated circulation pump and filling/draining cock.

- EKO CET 23 B without mentioned parts, but has an integrated wood storage.

Hot water supply demands:
In order to meet this requirement, the multiple stage boiler EKO-CET 23 can be connected to one of our hot water heaters. Therefore we suggest the combination with the wall hanged hot water heaters SKB Digi or LKB Digi, with standing hot water heaters TB120 - 200 l and TB 300 - 800 l or with solar hot water heaters STEB, as well as with combined hot water heaters CAS-BS, if there is a need to build in a solar heating system in the future.

Additional equipment:
Obligatory - in case the boiler is connected to the closed central heating system - thermal safety valve, safety-air vent group (2,5 bar), expansion vessel.